You are here:Home > Mercury Outboard Models > 1960 - 1963 > Merc 600 > Lower Unit
Sort By:
Page of 1
VENT SCREW KIT

Gear Case Vent screw with gasket for gear cases of many smaller Mercury Outboards.

List Price: $2.90
Our Price: $1.95
You save $0.95!
WATER PUMP GASKET, LOWER

Water Pump Gasket, lower.  Used on Mark 75, 75A, 78, 78A, and Merc 600

List Price: $3.60
Our Price: $3.00
You save $0.60!
GEARCASE DRAIN SCREW WITH GASKET

Gear Lube Drain screw with gasket for most Mercury lower units.  (Also used as vent screw in 1963 and newer 35HP and larger non-racing gear cases.)

Was 10-79953T2

This is used as both drain & vent on 1974 & prior models.  1975-76 use this for vent screw and 22-67892A06 magnetic drain screw.

List Price: $5.70
Our Price: $4.35
You save $1.35!
DRIVE/PROP SHAFT SEAL

Drive shaft seal for Merc 800 DR

Prop shaft seal for Mark 75, 75A, 78, 78A, Merc 600

Our Price: $6.55
GEAR LUBE

Gear Grease- 105 Lubriplate replaces original gear grease in all 1, 2, & 4 cyl. Mercurys through 1961. This heavier lube should also be used in non-shift motors of other brands. 10 oz.

Note: Modern 90 weight gear lube is generally unacceptable in these engines.

Our Price: $7.80
WATER PUMP GASKET, UPPER

Water Pump Gasket, upper.  Used on Mark 75, 75A, 78, 78A, and Merc 600.

Our Price: $7.99
PROP NUT TAB WASHER

Mark 75, 75A, 78, 78A, Merc 600

Our Price: $9.50
DRIVE/PROP SHAFT SEAL & WATER PUMP COVER SEAL

Drive shaft seal for Mark 35A, 55, 55A, 58, 58A, 75, 75H, 75A, 78, 78A, Merc 300, 350, 400, 450, 500, 600, 650, 700DR

Prop shaft seal for Mark 35A, 50, 55, 55A, 58, 58A, Merc 300, 350, 400, 450, 500

Water pump cover seal for Mark 75, 75A, 78, 78A, Merc 600

List Price: $15.70
Our Price: $13.00
You save $2.70!
LOWER UNIT SEAL KIT

Lower Unit Seal kit contains all lower unit seals and gaskets for Mark 75, 75A, 78, 78A and Merc 600

Our Price: $45.35