You are here:Home > "Mark" Models > Mark 40H > Lower Unit
Sort By:
Page of 1
SHEAR PIN

SHEAR PIN - See model guide for application

Our Price: $1.25
VENT SCREW KIT

Gear Case Vent screw with gasket for gear cases of many smaller Mercury Outboards.

List Price: $2.90
Our Price: $1.95
You save $0.95!
GEARCASE DRAIN SCREW WITH GASKET

Gear Lube Drain screw with gasket for most Mercury lower units.  (Also used as vent screw in 1963 and newer 35HP and larger non-racing gear cases.)

Was 10-79953T2

This is used as both drain & vent on 1974 & prior models.  1975-76 use this for vent screw and 22-67892A06 magnetic drain screw.

List Price: $5.70
Our Price: $4.35
You save $1.35!
NLA PROP NUT

Mark 40H, Mark 55H (SELF-LOCKING)

List Price: $5.24
Our Price: $4.75
You save $0.49!
PROP SHAFT SEAL

Mark 40H, 55H

Our Price: $6.38
GEAR LUBE

Gear Grease- 105 Lubriplate replaces original gear grease in all 1, 2, & 4 cyl. Mercurys through 1961. This heavier lube should also be used in non-shift motors of other brands. 10 oz.

Note: Modern 90 weight gear lube is generally unacceptable in these engines.

Our Price: $7.80
TOP/BOTTOM CRANKSHAFT SEAL, DRIVE SHAFT SEAL & PROP SHAFT SEAL

This is the top crankshaft seal for models K, KB & KD models, KE3, KE4, KE4A, KF3, Mark 7

This is the bottom crankshaft seal on the KF-3 for serial # 358552 thru 358612 and 358616 & up.

This is the drive shaft seal for Mark 10, 10A, 15A, 28, 28A, 40H, 55H, Merc 100, 150, 200, 350, 500, 650

This is the prop shaft seal for Mark 75H

Our Price: $10.80
WATER PUMP IMPELLER

Reproduction impeller for Mark 55H motors serial# 983920 thru 997919 and 1260725 and up
and D Class racing engines.
(Last Mercury price $51.20)

Our Price: $39.50
LOWER UNIT SEAL KIT

Lower Unit Seal Kit contains all lower unit seals for Mark 40 and Mark 55H and all 40 cubic inch engines with Quicksilver Racing lower units and needle bearing style tail cone.

Our Price: $40.20