You are here:Home > "Mark" Models > Mark 30H > Lower Unit
Sort By:
Page of 1
SHEAR PIN

SHEAR PIN - See model guide for application

Our Price: $1.25
VENT SCREW KIT

Gear Case Vent screw with gasket for gear cases of many smaller Mercury Outboards.

List Price: $2.90
Our Price: $1.95
You save $0.95!
GEARCASE DRAIN SCREW WITH GASKET

Gear Lube Drain screw with gasket for most Mercury lower units.  (Also used as vent screw in 1963 and newer 35HP and larger non-racing gear cases.)

Was 10-79953T2

This is used as both drain & vent on 1974 & prior models.  1975-76 use this for vent screw and 22-67892A06 magnetic drain screw.

List Price: $5.70
Our Price: $4.35
You save $1.35!
GEAR LUBE

Gear Grease- 105 Lubriplate replaces original gear grease in all 1, 2, & 4 cyl. Mercurys through 1961. This heavier lube should also be used in non-shift motors of other brands. 10 oz.

Note: Modern 90 weight gear lube is generally unacceptable in these engines.

Our Price: $7.80
LOWER UNIT PROP SHAFT SEAL, DRIVE SHAFT SEAL & WATER PUMP COVER SEAL

Lower unit prop shaft seal for KF7, KG4, KG7, KH7, Mark 15, 20, 25

This the driveshaft seal on the KH7.

This is the water pump cover seal for the Merc 200

List Price: $18.50
Our Price: $12.50
You save $6.00!
DRIVE SHAFT BALL BEARING

Mark 30H, 55H

Our Price: $18.10
DRIVE SHAFT/ PROP SHAFT BEARING

Drive shaft bearing for Mark 10, 10A, 15A, 28, 28A, 30H, 55H, Merc 100, 150, 200 & 250

Prop shaft bearing for Mark 5, 6, 6A, KF5 & KF3

Our Price: $21.35
DRIVE SHAFT ROLLER BEARING

Mark 20H
Mark 30H, 55H

Our Price: $24.50
PROP SHAFT BALL BEARING

Mark 20H
Mark 30H, 55H

Our Price: $26.85
PROP SHAFT BALL BEARING

Mark 20H, 30H, 55H

Our Price: $32.35
LOWER UNIT SEAL KIT

LOWER UNIT SEAL KIT - KG4H, KG7H

Our Price: $37.09
LOWER UNIT SEAL KIT

Lower Unit Seal Kit contains all lower unit seals for Mark 30H.

Our Price: $37.09